The design of the analog baseband circuit is based on 55 nm CMOS technology and is integrated in an IEEE 802.11ax concurrent dual band four antenna transceiver. A low-pass filter (LPF) of the receiver was multiplexed with an LPF-transmitter such that the last three stages of the fifth order LPF-receiver were used by the LPF-transmitter, and the first programmable gain amplifier (PGA) of the receiver was partially multiplexed with the PGA-transmitter such that the PGA-receiver and the PGA-transmitter shared the same operational amplifier and input resistance, thereby reducing the power consumption, noise, linearity, and area of intermediate frequency (IF) of the transmitter designed separately. The typical bandwidth of the IF-receiver is 10/20/40 MHz; that of the IF-transmitter is 12/24/50 MHz. The gain range of the IF-receiver and the IF-transmitter is 0.1–65.5 dB and 10.1 to 3.98 dB, respectively. Under the voltage of 1.5 V, the current of the IF-receiver is 3.86 mA. As for the IF-transmitter, the current is 1.78 mA when supply voltage is 1.5 V. The input referred noise (IRN) of the IF-receiver at 10 MHz bandwidth (BW) and 62 dB gain is 14.52 nV/ p Hz, while the IRN of the IF-transmitter at 10 MHz BW and 6 dB gain is 95.16 nV/ p Hz. The suppression ability of the DC offset cancellation circuit is 35.08/80.9/110.1/113 dB. The area of the analog baseband circuit is 0.17 mm2.
Loading....